| DIAMETER | 24.90 MILLIMETERS MINIMUM AND 25.00 MILLIMETERS MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 9.50 MILLIMETERS NOMINAL AND 44.00 MILLIMETERS NOMINAL AND 78.50 MILLIMETERS NOMINAL |
| EFFECTIVE LENGTH | 149.00 MILLIMETERS NOMINAL |
| FIRST END LOCATION | CHAMFERED END |
| FIRST END TAPER ANGLE | 15.0 DEGREES MINIMUM |
| FIRST END TAPER LENGTH | 5.00 MILLIMETERS NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 5.00 MILLIMETERS MINIMUM AND 8.50 MILLIMETERS MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SHERADIZED MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ZINC OVERALL |
| UNDERCUT DIAMETER | 15.00 MILLIMETERS NOMINAL |
| UNDERCUT RADIUS | 3.00 MILLIMETERS NOMINAL |
| UNDERCUT WIDTH | 6.00 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL | STEEL OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHOT-BOLT |
| OVERALL LENGTH | 166.50 MILLIMETERS NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SPECIAL FEATURES | 1ST HOLE IN GROOVE: 2ND HOLE TAPPED 10.00X1.50 ISO M: 3RD HOLE CSK 90 DEG TO 10 MM DIA BOTH ENDS; SLOTTED END HOLE LOCATION |
| STYLE DESIGNATOR | GROOVE |