| CRITICALITY CODE JUSTIFICATION | ABPR AND ABPV AND ABPT |
| FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 2.50 MILLIMETERS NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST STEP DIAMETER | 84.929 MILLIMETERS MINIMUM AND 84.964 MILLIMETERS MAXIMUM |
| FIRST STEP LENGTH | 90.00 MILLIMETERS NOMINAL |
| HEAD STYLE | FLAT |
| HEIGHT | 12.00 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS 970 PART 3 826.-40.Y BS SS99 CONDITION G NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHEAVE PIN |
| PIN HEAD DIAMETER | 95.00 MILLIMETERS NOMINAL |
| SECOND STEP DIAMETER | 68.250 MILLIMETERS MINIMUM AND 68.263 MILLIMETERS MAXIMUM |
| SECOND STEP LENGTH | 112.50 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | SLOT IN SIDE OF HEAD:DRILLED 214 MM DEEP FROM HEAD W/2 CROSS HOLES:2 HOLES IN |
| STYLE DESIGNATOR | SHOULDER |
| THIRD STEP DIAMETER | 68.203 MILLIMETERS MINIMUM AND 68.233 MILLIMETERS MAXIMUM |
| THIRD STEP LENGTH | 29.50 MILLIMETERS NOMINAL |
| UNDER HEAD LENGTH | 232.00 MILLIMETERS NOMINAL |