| DIAMETER | 0.6240 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.545 INCHES NOMINAL |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 4.88 MILLIMETERS MINIMUM AND 5.02 MILLIMETERS MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | L168-T6 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIVOT PIN-AFT |
| PIN HEAD DIAMETER | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| SPECIAL FEATURES | 0.350IN. ID |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF STAN 03-24 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| UNDER HEAD LENGTH | 2.110 INCHES MINIMUM AND 2.130 INCHES MAXIMUM |