| FIRST HOLE DIAMETER | 0.078 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS 970,PART 1,GRADE 080-40 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| OVERALL LENGTH | 2.000 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.078 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND SHANK DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.406 INCHES NOMINAL |
| SHANK DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| SHANK LENGTH | 0.406 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 250.0 MICROINCHES OVERALL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.657 INCHES MINIMUM AND 1.719 INCHES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |