| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.330 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.850 INCHES MINIMUM AND 3.870 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | AAVH |
| FIRST END LOCATION | BOTH ENDS |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 1.125 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS970,PT 2,GR 826-40,COND Y ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| OVERALL LENGTH | 6.490 INCHES MINIMUM AND 6.510 INCHES MAXIMUM |
| SPECIAL FEATURES | 7.0 DEG TAPER SHANK END; HEAT TREAT TO RELIEVE HYDROGEN EMBRITTLEMENT |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 1.125 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| SHANK LENGTH | 3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM |
| SHANK DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| SHOULDER DIAMETER | 2.1876 INCHES MINIMUM AND 2.1883 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 63.0 MICROINCHES SHANK END |
| SURFACE FINISH | 125.0 MICROINCHES SHOULDER END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF130 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ZINC OVERALL AND CHROMATE OVERALL |