|
|
|
National Stock Number:
5315-99-605-2635
Federal Supply Class:
5315
National Item Identification Number:
996052635
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 27024 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | 870-50260 | K7705 | KNDS DEFENCE UK LIMITED | | MEXE27024 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.719 INCHES MINIMUM AND 2.781 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.203 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | BS970 PART 1 GRADE 070-20 NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PIN OVERALL DIAMETER | 0.7480 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.219 INCHES MINIMUM AND 3.281 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.203 INCHES NOMINAL | | SPECIAL FEATURES | CLEAN SHERARDISE;BS4921,1988 CLASS 1 COATING MAX THK 0.002 AND PASSIVATE | | SURFACE FINISH | 63.0 MICROINCHES |
|
|