| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.080 INCHES MINIMUM AND 1.090 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | AAVH |
| FIRST END LOCATION | BOTH ENDS |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 1.125 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | DGFVE-232B ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| OVERALL LENGTH | 5.490 INCHES MINIMUM AND 5.510 INCHES MAXIMUM |
| SPECIAL FEATURES | 7.0 DEG TAPER ONE END; 0.438 IN. NOM BY 27.0 DEG CHAMFER SAME END; HOLE LOCATED ON CHAMFERED END |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SHANK LENGTH | 3.030 INCHES MINIMUM AND 3.050 INCHES MAXIMUM |
| SHANK DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| SHOULDER DIAMETER | 2.1876 INCHES MINIMUM AND 2.1883 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 250.0 MICROINCHES OVERALL |