| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.157 INCHES MINIMUM AND 2.219 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.1250 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | BSI BS 970 PART 3 GRADE 826-40 CONDITION Y NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN OVERALL DIAMETER | 0.6283 INCHES MINIMUM AND 0.6293 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 2.657 INCHES MINIMUM AND 2.719 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.1250 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SPECIAL FEATURES | SURFACE TREATMENT SHERADIZED |
| SURFACE FINISH | 250.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BS4921 NATIONAL SPEC 1ST TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ZINC AND PASSIVATE OVERALL |