| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.083 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST END TAPER ANGLE | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 1.60 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS S96 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIVOT PIN |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| OVERALL LENGTH | 1.350 INCHES NOMINAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND SHANK DIAMETER | 0.2500 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.600 INCHES NOMINAL |
| SHANK DIAMETER | 0.1855 INCHES MINIMUM AND 0.1865 INCHES MAXIMUM |
| SHANK LENGTH | 0.500 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.625 INCHES NOMINAL |
| SHOULDER WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL |
| SPECIAL FEATURES | U/CUT THREADED END |
| STYLE DESIGNATOR | SHOULDER |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.500 INCHES NOMINAL |
| THREAD PITCH DIAMETERS | +0.0357 TO 0.0357 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |