| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 20.00 MILLIMETERS NOMINAL |
| FIRST END TAPER ANGLE | 18.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 11.85 MILLIMETERS MINIMUM AND 12.15 MILLIMETERS MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 12.00 MILLIMETERS NOMINAL |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 12.00 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | EN10083 605-36(T) NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | MOUNTING PIN |
| PIN HEAD DIAMETER | 109.60 MILLIMETERS MINIMUM AND 110.40 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | W/AXIAL HOLE,152MM DEEP,THD HEAD END M8,INTERSECTED W/3 RADIAL HOLES;3 EXT GROOVES |
| SURFACE FINISH | 1.6 MICROMETERS OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF STAN 03-20 NATIONAL SPEC ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | ZINC AND PASSIVATE OVERALL |