|
|
|
National Stock Number:
5315-99-896-4460
Federal Supply Class:
5315
National Item Identification Number:
998964460
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| G412/4657 ITEM 9 | K7705 | KNDS DEFENCE UK LIMITED | | G412/4657/9 | K7705 | KNDS DEFENCE UK LIMITED |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 8.75 MILLIMETERS MINIMUM AND 9.25 MILLIMETERS MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 65.75 MILLIMETERS MINIMUM AND 66.25 MILLIMETERS MAXIMUM | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 1.25 MILLIMETERS MINIMUM AND 2.75 MILLIMETERS MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 8.00 MILLIMETERS MINIMUM AND 8.15 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 19.9590 MILLIMETERS MINIMUM AND 19.9800 MILLIMETERS MAXIMUM | | PIN OVERALL LENGTH | 83.75 MILLIMETERS MINIMUM AND 84.25 MILLIMETERS MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 8.00 MILLIMETERS MINIMUM AND 8.15 MILLIMETERS MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BS4921 CLASS 1 (SHERADISED) NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE AND ZINC OVERALL |
|
|