|
|
|
National Stock Number:
5315-99-931-6257
Federal Supply Class:
5315
National Item Identification Number:
999316257
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 950-06-01-997 | K7705 | KNDS DEFENCE UK LIMITED | | FV3002516 | U0795 | QINETIQ |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.800 INCHES MINIMUM AND 2.820 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | BS970 PART1,GRADE 826,-40,Y CONDITION NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.9980 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.300 INCHES MINIMUM AND 3.320 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BS4921,CLASS1 NATIONAL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE ZINC OVERALL |
|
|