|
|
|
National Stock Number:
5315-99-933-4433
Federal Supply Class:
5315
National Item Identification Number:
999334433
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| G101/5645 ITEM 13 | K7705 | KNDS DEFENCE UK LIMITED | | G101/5645/13 | K7705 | KNDS DEFENCE UK LIMITED |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.370 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.1880 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | BSI BS 970 PART 3 GRADE 826-40 CONDITION Y NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.120 INCHES MINIMUM AND 3.140 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.1880 INCHES NOMINAL | | SPECIAL FEATURES | SHERADIZED ZINC | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BSI BS 4921 CLASS 1 NATIONAL STD/SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND PASSIVATE OVERALL |
|
|