|
|
|
National Stock Number:
5315-99-961-5704
Federal Supply Class:
5315
National Item Identification Number:
999615704
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MR11180 | U1515 | DGS&E TIG IRC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.210 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.340 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL | | HARDNESS RATING | 600.0 VICKERS NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MOD DEF 13B GROUP 6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.760 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.070 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | OR 600.0 FIRTH DIAMOND PYRAMID HARDNESS;0.20/0.22 IN. BETWEEN HOLE CENTRE AND END | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|