| HEIGHT | 14.85 MILLIMETERS MINIMUM AND 15.15 MILLIMETERS MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | EN10083 605-36(T) NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-CYLINDER PIVOT |
| PIN HEAD DIAMETER | 54.85 MILLIMETERS MINIMUM AND 55.15 MILLIMETERS MAXIMUM |
| PIN CHAMFER ANGLE | 30.0 DEGREES NOMINAL |
| WIDTH ACROSS FLATS | 49.85 MILLIMETERS MINIMUM AND 50.15 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF STAN 03-20 NATIONAL SPEC ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | ZINC AND PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 315.00 MILLIMETERS NOMINAL |
| DIAMETER | 31.46 MILLIMETERS MINIMUM AND 31.60 MILLIMETERS MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 302.50 MILLIMETERS NOMINAL |
| CHAMFER LENGTH | 7.85 MILLIMETERS MINIMUM AND 8.15 MILLIMETERS MAXIMUM |
| FIRST HOLE DIAMETER | 11.90 MILLIMETERS MINIMUM AND 12.22 MILLIMETERS MAXIMUM |
| HEAD STYLE | ROUND W/WRENCH FLATS CHAMFERED |