| SHANK DIAMETER | 0.310 INCHES MINIMUM AND |
| 0.311 INCHES MAXIMUM |
| GRIP LENGTH | 1.531 INCHES NOMINAL |
| EXPANSION DEVICE | THREADED MANDREL |
| LUBRICATION | GREASE FILM OR |
| WAX OR |
| CETYL ALCOHOL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 92215 |
| DESIGN CONTROL REFERENCE | PLT110-10-24 |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| MATERIAL | STEEL COMP 4130 OR |
| STEEL COMP 4140 OR |
| STEEL COMP 8740 BOLT |
| STEEL COMP 4130 OR |
| STEEL COMP 8740 NUT |
| STEEL COMP 303 OR |
| STEEL COMP 304 SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR |
| AMS 5639 ASSN STD ALL MATERIAL RESPONSES OR |
| AMS 5641 ASSN STD ALL MATERIAL RESPONSES OR |
| QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE BOLT |
| CADMIUM AND |
| CHROMATE NUT |
| PASSIVATE AND |
| CADMIUM SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| QQ-P-416 TY2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE AND |
| QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND |
| 43.0 ROCKWELL C MAXIMUM BOLT |
| 39.0 ROCKWELL C MINIMUM AND |
| 43.0 ROCKWELL C MAXIMUM NUT |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| HEAD MAJOR DIAMETER | 0.577 INCHES MINIMUM AND |
| 0.635 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 2.408 INCHES NOMINAL |