5320-00-068-9040, RIVET,BLIND

National Stock Number:
5320-00-068-9040

Federal Supply Class:
5320

National Item Identification Number:
000689040

Description:
RIVET,BLIND

Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.

Manufacturer Information:

3M166-8-9	76301	THE BOEING COMPANY
BC8A9F	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
F260ALS9	92541	CUSTOM CRAFT PRODUCTS INC
FL260A-LS-9	98524	MONOGRAM AEROSPACE FASTENERS, INC
F260A-LS-9	98524	MONOGRAM AEROSPACE FASTENERS, INC
BC8A9F	C4293	ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH
NAS1672-4-9	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1672-4L9	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
PLT120-8-9	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
PLT120-8-9	98524	MONOGRAM AEROSPACE FASTENERS, INC
FL260A-LS-9	C4293	ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH

Techincal Specification:

HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SHANK STYLE	THREADED SELF-PLUGGING SHANK W/SLEEVE
MATERIAL	IRON ALLOY 660 BOLT
	IRON ALLOY 660 NUT
	IRON ALLOY 660 SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE BOLT
	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE NUT
	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE
SURFACE TREATMENT	PASSIVATE BOLT
	PASSIVATE NUT
	PASSIVATE SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT
	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT
	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE
HARDNESS RATING	30.0 ROCKWELL C MINIMUM AND
	45.0 ROCKWELL C MAXIMUM BOLT
	30.0 ROCKWELL C MINIMUM AND
	45.0 ROCKWELL C MAXIMUM NUT
HEAD MAJOR DIAMETER	0.499 INCHES MINIMUM AND
	0.507 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND
	101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.679 INCHES MINIMUM AND
	0.709 INCHES MAXIMUM
SHANK DIAMETER	0.258 INCHES MINIMUM AND
	0.260 INCHES MAXIMUM
GRIP LENGTH	0.531 INCHES MINIMUM AND
	0.594 INCHES MAXIMUM
EXPANSION DEVICE	SERRATED STEM-TYPE W
LUBRICATION	DRY FILM OR
	PARAFFIN WAX

Click here to Register for Free 30-day Trial