|
|
|
National Stock Number:
5320-00-247-4494
Federal Supply Class:
5320
National Item Identification Number:
002474494
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| B100-T12-31 | 0HDW7 | HUCK INTERNATIONAL, INC. | | B100-T12-31 | 17446 | HUCK INTERNATIONAL, INC | | B100-T12-31 | 29666 | HUCK MFG CO | | MS90353-1231 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM90353 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS90353-1231 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | MATERIAL | STEEL COMP 4027 OR | | STEEL COMP 4037 OR | | STEEL COMP 4130 SLEEVE | | STEEL COMP 8740 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR | | ASTM A547 ASSN STD 2ND MATERIAL RESPONSE OR | | 66 FED STD 3RD MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE | | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR | | ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE SLEEVE | | CADMIUM STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE | | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM | | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND | | 53.0 ROCKWELL C MAXIMUM STEM | | HEAD MAJOR DIAMETER | 0.762 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 2.220 INCHES MINIMUM AND | | 2.250 INCHES MAXIMUM | | SHANK DIAMETER | 0.372 INCHES MINIMUM AND | | 0.374 INCHES MAXIMUM | | GRIP LENGTH | 1.906 INCHES MINIMUM AND | | 1.970 INCHES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W |
|
|