| MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OR |
| OXIDE FILM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR |
| MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| SHEAR STRENGTH | 26000 SINGLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD HEIGHT | 0.055 INCHES NOMINAL |
| HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND |
| 0.290 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND |
| 100.5 DEGREES MAXIMUM |
| SHANK STYLE | STRAIGHT WITH TAPERED TIP |
| FASTENER LENGTH | 1.615 INCHES MINIMUM AND |
| 1.635 INCHES MAXIMUM |
| SHANK DIAMETER | 0.155 INCHES MINIMUM AND |
| 0.159 INCHES MAXIMUM |
| CHAMFER LENGTH | 0.039 INCHES NOMINAL |
| GRIP LENGTH | 1.381 INCHES MINIMUM AND |
| 1.401 INCHES MAXIMUM |
| TIP DIAMETER | 0.078 INCHES NOMINAL |