| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| MATERIAL | STEEL COMP 4140 OR |
| STEEL COMP 8740 OR |
| STEEL COMP 4130 BOLT |
| STEEL COMP 4140 OR |
| STEEL COMP 4130 NUT |
| STEEL COMP 304 OR |
| STEEL COMP 303F OR |
| STEEL COMP 303 SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR |
| AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR |
| AMS 5641 ASSN STD 2ND MATERIAL RESPONSE OR |
| ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE BOLT |
| CADMIUM AND |
| CHROMATE NUT |
| CHROMATE AND |
| PASSIVATE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND |
| QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND |
| 43.0 ROCKWELL C MAXIMUM BOLT |
| 39.0 ROCKWELL C MINIMUM AND |
| 43.0 ROCKWELL C MAXIMUM NUT |
| HEAD MAJOR DIAMETER | 0.342 INCHES MINIMUM AND |
| 0.385 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 100.1 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.088 INCHES MINIMUM AND |
| 1.118 INCHES MAXIMUM |
| SHANK DIAMETER | 0.213 INCHES MINIMUM AND |
| 0.215 INCHES MAXIMUM |
| GRIP LENGTH | 0.969 INCHES MINIMUM AND |
| 1.031 INCHES MAXIMUM |
| EXPANSION DEVICE | THREADED MANDREL |
| LUBRICATION | GREASE FILM |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 92215 |
| DESIGN CONTROL REFERENCE | BAV6A16F |