|
|
|
National Stock Number:
5320-00-291-5457
Federal Supply Class:
5320
National Item Identification Number:
002915457
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 10204909 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AIC-L611V5-2 | 06725 | SPS TECHNOLOGIES, LLC | | AICL611V5-2 | 06725 | SPS TECHNOLOGIES, LLC | | CR611V5-2 | 11815 | SPS TECHNOLOGIES, LLC | | HL611-5-2 | 17446 | HUCK INTERNATIONAL, INC | | HL611-5-2 | 50392 | SPS TECHNOLOGIES INC | | HL611-5-2 | 56878 | SPS TECHNOLOGIES, LLC | | HL611-5-2 | 58845 | ABOUNDING SECURITY INC DIV OF MAA CORP | | HL611-5-2 | 60516 | WEST COAST AEROSPACE, INC. | | HL611-5-2 | 73197 | HI-SHEAR CORPORATION | | ST3M415V08-2 | 76301 | THE BOEING COMPANY | | HL611-5-2 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL611-5-2 | 97928 | HUCK INTL INC | | HL611-5-2 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM | | GRIP LENGTH | 0.130 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.256 INCHES MINIMUM AND 0.261 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES | | SHANK DIAMETER | 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJC | | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|
|