|
|
|
National Stock Number:
5320-00-466-0503
Federal Supply Class:
5320
National Item Identification Number:
004660503
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| B100-T08-17 | 0HDW7 | HUCK INTERNATIONAL, INC. | | B100-T08-17 | 17446 | HUCK INTERNATIONAL, INC | | MS90353-0817 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM90353 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS90353-0817 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | MATERIAL | STEEL COMP 4037 OR | | STEEL COMP 4130 OR | | STEEL COMP 4027 SLEEVE | | STEEL COMP 8740 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR | | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE SLEEVE | | QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM | | SURFACE TREATMENT | CADMIUM BODY | | CADMIUM STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BODY | | QQ-P-416,TY 1,CL3 FED SPEC SINGLE TREATMENT RESPONSE STEM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM BODY | | 48.0 ROCKWELL C MINIMUM AND | | 53.0 ROCKWELL C MAXIMUM STEM | | SHEAR STRENGTH | 5900 SINGLE POUNDS PER SQUARE INCH | | HEAD MAJOR DIAMETER | 0.507 INCHES MINIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.266 INCHES MINIMUM AND | | 1.296 INCHES MAXIMUM | | SHANK DIAMETER | 0.258 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | GRIP LENGTH | 1.031 INCHES MINIMUM AND | | 1.095 INCHES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W |
|
|