|
|
|
National Stock Number:
5320-00-615-1991
Federal Supply Class:
5320
National Item Identification Number:
006151991
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| LT852-8040-19 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TL852-8040-19 | 17446 | HUCK INTERNATIONAL, INC | | TL852-8040-19 | 27624 | SPS TECHNOLOGIES LLC | | TL852-8040-19 | 56878 | SPS TECHNOLOGIES, LLC | | TL852-8040-19 | 59563 | REID PRODUCTS INC. | | TL852-8040-19 | 80539 | SPS TECHNOLOGIES, LLC | | TL852-8040-19 | 97928 | HUCK INTL INC | | TL852-8040-19 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.662 INCHES MINIMUM AND 1.687 INCHES MAXIMUM | | GRIP LENGTH | 1.177 INCHES MINIMUM AND 1.192 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 1.987 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8740 OR STEEL COMP E4340 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.500 INCHES | | SHANK DIAMETER | 0.5608 INCHES NOMINAL | | SHANK STYLE | PIN-RIVET, TAPERED, THREADED | | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | 0.5595 IN. SECOND SHANK DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 | | TIP DIAMETER | 0.5387 INCHES NOMINAL |
|
|