| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| EXPANSION DEVICE | THREADED MANDREL |
| GRIP LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE BOLT |
| MATERIAL | STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| MATERIAL | STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT |
| MATERIAL | STEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| SHANK DIAMETER | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE SLEEVE OR QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM NUT AND CHROMATE NUT |
| SURFACE TREATMENT | PASSIVATE SLEEVE OR CADMIUM SLEEVE |