| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |
| GRIP LENGTH | 0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| HEAD MAJOR DIAMETER | 0.626 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAT TREATMENT | ANNEALED OVERALL |
| LUBRICATION | GREASE FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | STEEL COMP 304 SLEEVE |
| MATERIAL | STEEL COMP 8740 BODY |
| MATERIAL | STEEL COMP 8740 STEM |
| SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| SHEAR STRENGTH | 146000 DOUBLE POUNDS PER SQUARE INCH |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE BOLT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
| SURFACE TREATMENT | CADMIUM AND PASSIVATE SLEEVE |