| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.338 INCHES MINIMUM AND 0.368 INCHES MAXIMUM |
| GRIP LENGTH | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HEAT TREATMENT | ANNEALED OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| LUBRICATION | DRY FILM OR WAX |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE STEM |
| MATERIAL | STEEL COMP 303F SLEEVE |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 STEM |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 BODY |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| SHANK DIAMETER | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| SHEAR STRENGTH | 5240 DOUBLE POUNDS PER SQUARE INCH |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SPECIAL FEATURES | HEAD AND UNDERSIDE OF HEAD PAINTED WITH PRIMER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT | CADMIUM BODY |
| SURFACE TREATMENT | CADMIUM SLEEVE |
| SURFACE TREATMENT | CADMIUM STEM |