|
|
|
National Stock Number:
5320-00-857-6242
Federal Supply Class:
5320
National Item Identification Number:
008576242
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 3M250A3-7 | 76301 | THE BOEING COMPANY | | HL553-6-7 | 17446 | HUCK INTERNATIONAL, INC | | HL553-6-7 | 27624 | SPS TECHNOLOGIES LLC | | HL553-6-7 | 56878 | SPS TECHNOLOGIES, LLC | | HL553-6-7 | 73197 | HI-SHEAR CORPORATION | | HL553-6-7 | 80539 | SPS TECHNOLOGIES, LLC | | HL553-6-7 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL553-6-7 | 97928 | HUCK INTL INC | | HL553-6-7 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | HL553-6-7 | R1120 | SATAIR A/S |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.793 INCHES MINIMUM AND 0.828 INCHES MAXIMUM | | GRIP LENGTH | 0.463 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.190 INCHES | | SHANK DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJF | | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
|
|