|
|
|
National Stock Number:
5320-00-928-7441
Federal Supply Class:
5320
National Item Identification Number:
009287441
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| MS24661-21 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24661-21 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | DRIVE PIN | | MATERIAL | ALUMINUM ALLOY 2117 BODY | | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 303F OR | | STEEL COMP 303S OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 323 OR | | STEEL COMP 324 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 385 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY | | 66 FED STD ALL MATERIAL RESPONSES STEM | | SURFACE TREATMENT | ANODIZE OR | | CHROMATE BODY | | PASSIVATE STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR | | MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE BODY | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM | | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND | | 0.229 INCHES MAXIMUM | | COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND | | 102.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.396 INCHES MINIMUM AND | | 0.436 INCHES MAXIMUM | | SHANK DIAMETER | 0.123 INCHES MINIMUM AND | | 0.127 INCHES MAXIMUM | | GRIP LENGTH | 0.297 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | EXPANSION DEVICE | DRIVE STEM-TYPE H |
|
|