|
|
|
National Stock Number:
5320-00-959-0144
Federal Supply Class:
5320
National Item Identification Number:
009590144
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| BACB30FN8-16 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30FN8-16 | 81205 | THE BOEING COMPANY | | HL19PB-8-16 | 06725 | SPS TECHNOLOGIES, LLC | | HL19PB-8-16 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL19PB-8-16 | 17446 | HUCK INTERNATIONAL, INC | | GB510B4-16 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL19PB-8-19 | 06725 | SPS TECHNOLOGIES, LLC | | HL19PB-8-16 | 56878 | SPS TECHNOLOGIES, LLC | | HL19PB-8-16 | 60516 | WEST COAST AEROSPACE, INC. | | HL19PB-8-16 | 73197 | HI-SHEAR CORPORATION | | HL19PB-8-16 | 80539 | SPS TECHNOLOGIES, LLC | | HL19PB-8-16 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.385 INCHES MINIMUM AND 1.405 INCHES MAXIMUM | | GRIP LENGTH | 1.005 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | WIDTH BETWEEN FLATS | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF |
|
|