| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.153 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| GRIP LENGTH | 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT |
| HEAD HEIGHT | 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| HEAT TREATMENT | ANNEALED OVERALL |
| HEAD STYLE | HEXAGON |
| LUBRICATION | WAX OR DRY FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATERIAL | ALUMINUM ALLOY 7075 NUT |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 303 OR STEEL COMP 303F SLEEVE |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT |
| SHANK DIAMETER | 0.163 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| SHEAR STRENGTH | 1920 DOUBLE POUNDS PER SQUARE INCH |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| WIDTH ACROSS FLATS | 0.277 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | Q-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT | ANODIZE NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE AND PASSIVATE SLEEVE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE BOLT |