|
|
|
National Stock Number:
5320-01-016-7575
Federal Supply Class:
5320
National Item Identification Number:
010167575
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 100-059-8-7 | 06725 | SPS TECHNOLOGIES, LLC | | 100-059-8-7 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 100-059-8-7 | 17446 | HUCK INTERNATIONAL, INC | | 100-059-8-7 | 56878 | SPS TECHNOLOGIES, LLC | | 100-059-8-7 | 60516 | WEST COAST AEROSPACE, INC. | | 100-059-8-7 | 73197 | HI-SHEAR CORPORATION | | 100-059-8-7 | 97499 | BELL TEXTRON INC | | 100-059-8-7 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | HL33PB-8-7 | 06725 | SPS TECHNOLOGIES, LLC | | HL33PB-8-7 | 17446 | HUCK INTERNATIONAL, INC | | HL33PB-8-7 | 56878 | SPS TECHNOLOGIES, LLC | | HL33PB-8-7 | 60516 | WEST COAST AEROSPACE, INC. | | HL33PB-8-7 | 73197 | HI-SHEAR CORPORATION | | HL33PB-8-7 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.823 INCHES MINIMUM AND 0.843 INCHES MAXIMUM | | GRIP LENGTH | 0.443 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 5628 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | MINIMUM TENSILE STRENGTH | 210000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|