|
|
|
National Stock Number:
5320-01-129-4525
Federal Supply Class:
5320
National Item Identification Number:
011294525
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 10124099 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5320PL1574748 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | CR3212-5-02 | 11815 | SPS TECHNOLOGIES, LLC | | CR3212-5-2 | 11815 | SPS TECHNOLOGIES, LLC | | AF3212-5-02 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | AF3212-5-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | HC3212-5-02 | 0HDW7 | HUCK INTERNATIONAL, INC. | | HC3212-5-02 | 17446 | HUCK INTERNATIONAL, INC | | CR3212-5-2 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | CR3212-5-2 | A0311 | TECNO TRADE S.R.L. | | CR3212-5-2 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | CR3212-5-2 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | CR3212-5-2 | FB009 | KLX INC | | CR3212-5-2 | FB011 | AERO STOCK | | HC3212-5-2 | 17446 | HUCK INTERNATIONAL, INC | | NAS9302BNS-5-02 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MIL-R-7885/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M7885/3-5-02 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M7885/3-5-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MBBN3013L4002 | C0417 | AIRBUS HELICOPTERS DEUTSCHLAND GMBH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.470 INCHES MAXIMUM | | GRIP LENGTH | 0.065 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE | | MATERIAL | ALUMINUM ALLOY 5056 SLEEVE | | MATERIAL | STEEL COMP 8740 STEM | | SHANK DIAMETER | 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | SPECIAL FEATURES | NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM | | SURFACE TREATMENT | CADMIUM STEM | | SURFACE TREATMENT | CHROMATE SLEEVE |
|
|