|
|
|
National Stock Number:
5320-01-140-5723
Federal Supply Class:
5320
National Item Identification Number:
011405723
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 10111629 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3M757C4-17-57 | 56878 | SPS TECHNOLOGIES, LLC | | HLT265TB-8-17-57 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT265TB-8-17-57 | 17446 | HUCK INTERNATIONAL, INC | | 3M757C4-17-57 | 60516 | WEST COAST AEROSPACE, INC. | | 3M757C4-17-57 | 76301 | THE BOEING COMPANY | | HLT265TB-8-17-57 | 56878 | SPS TECHNOLOGIES, LLC | | HLT265TB-8-17-57 | 60516 | WEST COAST AEROSPACE, INC. | | HLT265TB-8-17-57 | 73197 | HI-SHEAR CORPORATION | | ST3M757C4-17-57 | 76301 | THE BOEING COMPANY | | HLT265TB-8-17-57 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT265TB-8-17-57 | 97928 | HUCK INTL INC | | HLT265TB-8-17-57 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | FASTENER LENGTH | 1.447 INCHES MINIMUM AND 1.467 INCHES MAXIMUM | | GRIP LENGTH | 1.067 INCHES MAXIMUM | | HARDNESS RATING | 44.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.1195 INCHES NOMINAL | | HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER | | HEAD MAJOR DIAMETER | 0.5066 INCHES MAXIMUM | | LUBRICATION | SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 210000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SPECIAL FEATURES | 0.138-32UNJC-3B THREADED CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE OF HEAD END 0.300 IN. MIN,0.345 IN. MAX DP,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 0.570 IN. FROM TOP OF HEAD TO BEGINNING OF SLOT | | WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|