|
|
|
National Stock Number:
5320-01-150-2762
Federal Supply Class:
5320
National Item Identification Number:
011502762
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| AF3242-6-10 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | CR3242-6-10 | 11815 | SPS TECHNOLOGIES, LLC | | HR3242-6-10 | 0HDW7 | HUCK INTERNATIONAL, INC. | | NAS9305BNS-6-10 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M7885/7-6-10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-7885/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 1.010 INCHES NOMINAL | | GRIP LENGTH | 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.353 INCHES NOMINAL | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | LUBRICATION | DRY FILM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD 1ST MATERIAL RESPONSE LOCKING RING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6322 ASSN STD 3RD MATERIAL RESPONSE STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-430 FED SPEC 2ND MATERIAL RESPONSE SLEEVE | | MATERIAL | ALUMINUM ALLOY 5056 SLEEVE | | MATERIAL | STEEL CORROSION RESISTING LOCKING RING | | MATERIAL | STEEL COMP 8740 STEM | | SHANK DIAMETER | 0.201 INCHES NOMINAL | | SHANK STYLE | SELF-PLUGGING HIGH CLINCH SHANK | | SPECIAL FEATURES | NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
|
|