|
|
|
National Stock Number:
5320-01-163-0179
Federal Supply Class:
5320
National Item Identification Number:
011630179
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 10111889 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5320PL1526393 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AF3212-6-02 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | AF3212-6-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | 5320PL2120436 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | ASNA0077A0602 | F5442 | AIRBUS GROUP SAS | | HC3212-6-02 | 0HDW7 | HUCK INTERNATIONAL, INC. | | CR3212-6-02 | 11815 | SPS TECHNOLOGIES, LLC | | CR3212-6-2 | 11815 | SPS TECHNOLOGIES, LLC | | HC3212-6-2 | 17446 | HUCK INTERNATIONAL, INC | | HC3212-6-02 | 17466 | GE KAYE INSTRUMENTS INC | | CR3212-6-2 | A0311 | TECNO TRADE S.R.L. | | CR3212-6-2 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | CR3212-6-2 | FB009 | KLX INC | | NAS9302BNS-6-02 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M7885/3-6-02 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-7885/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | MATERIAL | IRON ALLOY 660 LOCKING RING | | ALUMINUM ALLOY 5056 SLEEVE | | STEEL COMP 8740 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE LOCKING RING | | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE | | AMS6322 ASSN STD SINGLE MATERIAL RESPONSE STEM | | SURFACE TREATMENT | CHROMATE SLEEVE | | CADMIUM STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE | | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE STEM | | MINIMUM TENSILE STRENGTH | 635 POUNDS PER SQUARE INCH | | HEAD MAJOR DIAMETER | 0.349 INCHES MINIMUM AND | | 0.357 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.193 INCHES NOMINAL | | SHANK DIAMETER | 0.110 INCHES NOMINAL | | GRIP LENGTH | 0.080 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
|
|