|
|
|
National Stock Number:
5320-01-177-1681
Federal Supply Class:
5320
National Item Identification Number:
011771681
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| OSMLS100-B04-07 | 0HDW7 | HUCK INTERNATIONAL, INC. | | OSMLS100-B04-07 | 17446 | HUCK INTERNATIONAL, INC | | OSMLS100B4-7 | 0HDW7 | HUCK INTERNATIONAL, INC. | | OSMLS100B4-7 | 17446 | HUCK INTERNATIONAL, INC | | OSMLS100B4-7 | 29666 | HUCK MFG CO | | OSMLS100-B04-07 | F6167 | HUCK |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.573 INCHES NOMINAL | | GRIP LENGTH | 0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | MATERIAL | ALUMINUM ALLOY OVERALL | | MINIMUM TENSILE STRENGTH | 325 POUNDS PER SQUARE INCH | | SHANK DIAMETER | 0.140 INCHES NOMINAL | | SHANK STYLE | SELF-PLUGGING | | SHEAR STRENGTH | 560 SINGLE POUNDS PER SQUARE INCH | | SURFACE TREATMENT | ANODIZE EXPANDER | | TEST DATA DOCUMENT | 29666-OSMLS100 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|