|
|
|
National Stock Number:
5320-01-177-9796
Federal Supply Class:
5320
National Item Identification Number:
011779796
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| AIC-L-839X8-9 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30FQ8-9 | 81205 | THE BOEING COMPANY | | HL63-8-9 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | GB510R8-9 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL63-8-9 | 56878 | SPS TECHNOLOGIES, LLC | | HL63-8-9 | 73197 | HI-SHEAR CORPORATION | | HL63PB-8-9 | 06725 | SPS TECHNOLOGIES, LLC | | HL63PB-8-9 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL63PB-8-9 | 17446 | HUCK INTERNATIONAL, INC | | HL63PB-8-9 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL63PB-8-9 | 56878 | SPS TECHNOLOGIES, LLC | | HL63PB-8-9 | 60516 | WEST COAST AEROSPACE, INC. | | HL63-8-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL63-8-9 | 97928 | HUCK INTL INC | | L-839X8-9 | 06725 | SPS TECHNOLOGIES, LLC | | HL63PB-8-9 | 73197 | HI-SHEAR CORPORATION | | HL63PB-8-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL63PB-8-9 | 97928 | HUCK INTL INC | | HL63PB-8-9 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.947 INCHES MINIMUM AND 0.967 INCHES MAXIMUM | | GRIP LENGTH | 0.567 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.3948 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|