|
|
|
National Stock Number:
5320-01-283-6607
Federal Supply Class:
5320
National Item Identification Number:
012836607
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| CR7310U-8-15 | 11815 | SPS TECHNOLOGIES, LLC | | MS90353U0815 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | UB100-T08-15 | 0HDW7 | HUCK INTERNATIONAL, INC. | | UB100-T08-15 | 17446 | HUCK INTERNATIONAL, INC | | NASM90353 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS90353U0815 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | UB100-T8-15 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 1.193 INCHES NOMINAL | | GRIP LENGTH | 0.906 INCHES MINIMUM AND 0.970 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.431 INCHES MINIMUM AND 0.432 INCHES MAXIMUM | | MATERIAL | STEEL SLEEVE | | MINIMUM YIELD STRENGTH | 3650 POUNDS PER SQUARE INCH | | SHANK DIAMETER | 0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | SHANK STYLE | PULL THROUGH HOLLOW SHANK | | SHEAR STRENGTH | 5900 SINGLE POUNDS PER SQUARE INCH | | SPECIFICATION/STANDARD DATA | 96906-MS90353 GOVERNMENT STANDARD | | SURFACE TREATMENT | CADMIUM SLEEVE |
|
|