|
|
|
National Stock Number:
5320-01-298-2471
Federal Supply Class:
5320
National Item Identification Number:
012982471
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 4448S06-04PR | 17446 | HUCK INTERNATIONAL, INC | | AIC-L-807-6-4PR | 06725 | SPS TECHNOLOGIES, LLC | | AIC-L-807-6-4PX | 06725 | SPS TECHNOLOGIES, LLC | | HLT915-6-4PX | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT915-6-4PX | 56878 | SPS TECHNOLOGIES, LLC | | C9570-6-4PX | 81755 | LOCKHEED MARTIN CORPORATION | | HLT923LP-6-4 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT923LP-6-4 | 17446 | HUCK INTERNATIONAL, INC | | HLT923LP-6-4 | 56878 | SPS TECHNOLOGIES, LLC | | HLT923LP-6-4 | 73197 | HI-SHEAR CORPORATION | | HLT915-6-4PX | 73197 | HI-SHEAR CORPORATION | | HLT915-6-4PX | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT923LP-6-4 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM | | GRIP LENGTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.356 INCHES MINIMUM | | LUBRICATION | DRY FILM AND CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 10800 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.190 INCHES | | SHANK DIAMETER | 0.0156 INCHES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|