| FASTENER LENGTH | 2.080 INCHES MINIMUM AND 2.100 INCHES MAXIMUM |
| GRIP LENGTH | 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| HEAD HEIGHT | 0.103 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| HEAD STYLE | ERR-090 |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED COLLAR |
| LUBRICATION | SOLID FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE COLLAR |
| MATERIAL | ALUMINUM ALLOY 2024 COLLAR |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 BODY |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| SHANK DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | THIS IS A FASTENER ASSEMBLY CONSISTING OF AN ALLOY STEEL PIN AND ALUMINUM COLLAR; 0.805 IN.-0.815 IN. COLLAR OD,0.640 IN. COLLAR OVERALL HEIGHT,0.500 IN. COLLAR ID |
| WIDTH BETWEEN FLATS | 0.219 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HI-SHEAR CORPORATION SPEC. 311,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE COLLAR |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT | ANODIZE COLLAR |
| SURFACE TREATMENT | CADMIUM BODY |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 20 |