|
|
|
National Stock Number:
5320-01-327-0423
Federal Supply Class:
5320
National Item Identification Number:
013270423
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 03A087-8-23 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | HLT333FBA-8-23 | 06516 | RELIANCE ELECTRIC INDUSTRIAL CO BEAR STATE SERVICE CENTER | | HLT333FBA-8-23 | 06725 | SPS TECHNOLOGIES, LLC | | HLT333FBA-8-23 | 0PTK6 | SPS TECHNOLOGIES INC | | HLT333FBA-8-23 | 17446 | HUCK INTERNATIONAL, INC | | HLT333FBA-8-23 | 56878 | SPS TECHNOLOGIES, LLC | | HLT33FBA-8-23 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT333FBA-8-23 | 73197 | HI-SHEAR CORPORATION | | HLT333FBA-8-23 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT33FBA-8-23 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT333FBA-8-23 | 97928 | HUCK INTL INC | | HLT333FBA-8-23 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.823 INCHES MINIMUM AND 1.843 INCHES MAXIMUM | | GRIP LENGTH | 1.433 INCHES MINIMUM AND 1.443 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SPECIAL FEATURES | GRIT BLAST TOP OF HEADS; O-RING,SYNTHETIC RUBBER PER MIL-R-6855,CLASS 1,2,AND 3,AND MIL-R-3065,CLASS SB612E,TEMPERATURE RANGE-70 DEG TO 225 DEG F | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
|
|