|
|
|
National Stock Number:
5320-01-335-6508
Federal Supply Class:
5320
National Item Identification Number:
013356508
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 03A074-5-5A | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 03A074-5-5A | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | AIC-L779V08K-5 | 06725 | SPS TECHNOLOGIES, LLC | | HLT451AP-5-5 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT451AP-5-5 | 0PTK6 | SPS TECHNOLOGIES INC | | 03A074-5-5A | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HLT451AP-5-5 | 17446 | HUCK INTERNATIONAL, INC | | HLT451AP-5-5 | 56878 | SPS TECHNOLOGIES, LLC | | HLT451AP-5-5 | 60516 | WEST COAST AEROSPACE, INC. | | HLT451AP-5-5 | 73197 | HI-SHEAR CORPORATION | | HLT451AP-5-5 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT451AP-5-5 | 97928 | HUCK INTL INC | | HLT451AP-5-5 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | GRIP LENGTH | 0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.2564 INCHES MINIMUM AND 0.2612 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES | | SHANK DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0801 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SPEC. 294,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM ALLOY OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJC | | THREAD QUANTITY PER INCH | 32 |
|
|