| COUNTERSINK ANGLE | 129.0 DEGREES MINIMUM AND 131.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | THREADED STEM |
| FEATURES PROVIDED | DRIVE NUT |
| GRIP LENGTH | 0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.499 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| HEAT TREATMENT | ANNEALED SLEEVE |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| LUBRICATION | DRY FILM OR CETYL ALCOHOL OR PARAFFIN WAX |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | IRON ALLOY 660 BOLT |
| MATERIAL | STEEL COMP 304 SLEEVE |
| MATERIAL | TITANIUM ALLOY UNS R56400 NUT |
| MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | ACETAL PER L-P-392,INSERT; MILD STEEL,COLOR BROWN,DRIVENUT; 175 KSI FTU MINIMUM,SCREW; LOCKING FEATURE CONSISTS OF 3 INDENTATIONS LOCATED 120 DEGREES APART ON THE PERIPHERY OF THE NUT COMPONENT |
| SHANK DIAMETER | 0.2575 INCHES MINIMUM AND 0.2595 INCHES MAXIMUM |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS741,CAGEC 98524 MFR REF SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | PASSIVATE BOLT |
| SURFACE TREATMENT | PASSIVATE SLEEVE |
| SURFACE TREATMENT | PHOSPHATE NUT |