| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| GRIP LENGTH | 0.870 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 100000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| SHANK DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 160000 SINGLE POUNDS PER SQUARE INCH |
| WIDTH BETWEEN FLATS | 0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 20 |