| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| MATERIAL | STEEL CORROSION RESISTING OR |
| STEEL COMP 1010 OR |
| STEEL COMP 1020 OR |
| STEEL COMP 1144 OR |
| STEEL COMP 4037 OR |
| STEEL COMP 4130 OR |
| IRON ALLOY 660 MECHANICAL LOCK |
| STEEL CORROSION RESISTING SLEEVE |
| STEEL CORROSION RESISTING STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS5690,TYPE316,CRES ASSN STD SINGLE MATERIAL RESPONSE MECHANICAL LOCK |
| ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| SURFACE TREATMENT | CADMIUM AND |
| PASSIVATE AND |
| ALUMINUM MECHANICAL LOCK |
| CADMIUM AND |
| ALUMINUM SLEEVE |
| ALUMINUM STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE AND |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR |
| MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OR |
| MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| QQ-P-416,TYPE1,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE OR |
| MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE STEM |
| HARDNESS RATING | 326.0 KNOOP MINIMUM AND |
| 466.0 KNOOP MAXIMUM SLEEVE |
| 48.0 ROCKWELL C MINIMUM AND |
| 53.0 ROCKWELL C MAXIMUM STEM |
| HEAD MAJOR DIAMETER | 0.386 INCHES NOMINAL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.916 INCHES MAXIMUM |
| SHANK DIAMETER | 0.197 INCHES MINIMUM AND |
| 0.199 INCHES MAXIMUM |
| GRIP LENGTH | 0.531 INCHES MINIMUM AND |
| 0.595 INCHES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SPECIAL FEATURES | INSTALLED WITH SINGLE ACTION TOOL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FASTENER,BLIND,HIGH STRENGTH, PULL TYPE,POSITIVE MECHANICAL LOCK,100 DEGREE FLUSH HEAD |