|
|
|
National Stock Number:
5320-01-477-5818
Federal Supply Class:
5320
National Item Identification Number:
014775818
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 3M757D5-9-34 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | 3M757D5-9-34 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | HLT941DL10-9-34 | 56878 | SPS TECHNOLOGIES, LLC | | HLT941DL10-9-34 | 60516 | WEST COAST AEROSPACE, INC. | | HLT941DL10-9-34 | 73197 | HI-SHEAR CORPORATION | | 3M757D5-9-34 | 76301 | THE BOEING COMPANY | | HP6757D59-34 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | HLT941TB10-9-34 | 56878 | SPS TECHNOLOGIES, LLC | | HLT941TB10-9-34 | 60516 | WEST COAST AEROSPACE, INC. | | HLT941TB10-9-34 | 73197 | HI-SHEAR CORPORATION | | HLT941TB10-9-34 | 80539 | SPS TECHNOLOGIES, LLC | | HLT941DL10-9-34 | 80539 | SPS TECHNOLOGIES, LLC | | HLT941DL10-9-34 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT941TB10-9-34 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM | | GRIP LENGTH | 0.563 INCHES NOMINAL | | HEAD MAJOR DIAMETER | 0.597 INCHES MINIMUM AND 0.604 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SPECIAL FEATURES | DISTANCE BETWEEN THE HEAD AND INJECTION PORT IS .34 INCHES.INDENTED SLOTS ON THE HEAD ARE IN LINE WITH THE INJECTION PORT. | | WIDTH BETWEEN FLATS | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|