|
|
|
National Stock Number:
5320-01-477-5825
Federal Supply Class:
5320
National Item Identification Number:
014775825
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 3M757D6-12-40 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | 3M757D6-12-40 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | HLT941DL12-12-40 | 56878 | SPS TECHNOLOGIES, LLC | | HLT941DL12-12-40 | 60516 | WEST COAST AEROSPACE, INC. | | HLT941DL12-12-40 | 73197 | HI-SHEAR CORPORATION | | 3M757D6-12-40 | 76301 | THE BOEING COMPANY | | HP6757D612-40 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | HLT941TB12-12-40 | 56878 | SPS TECHNOLOGIES, LLC | | HLT941TB12-12-40 | 60516 | WEST COAST AEROSPACE, INC. | | HLT941TB12-12-40 | 73197 | HI-SHEAR CORPORATION | | HLT941TB12-12-40 | 80539 | SPS TECHNOLOGIES, LLC | | HLT941DL12-12-40 | 80539 | SPS TECHNOLOGIES, LLC | | HLT941DL12-12-40 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT941TB12-12-40 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.295 INCHES NOMINAL | | GRIP LENGTH | 0.750 INCHES NOMINAL | | HEAD MAJOR DIAMETER | 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET, THREAD, TENSION, 100 DEGREE COUNTERSUNK HEAD HEX POINT DRIVE, FOR SEALANT APPLICATION | | SHANK DIAMETER | 0.374 INCHES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SPECIAL FEATURES | DISTANCE FROM THE HEAD TO THE INJECTION PORT IS 0.40 INCHES. INDENTED SLOTS ON THE HEAD ARE IN LINE WITH THE INJECTION PORT. | | WIDTH BETWEEN FLATS | 0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|