|
|
|
National Stock Number:
5320-01-499-8107
Federal Supply Class:
5320
National Item Identification Number:
014998107
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| BACB30FQ10-7 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30FQ10-7 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30FQ10-7 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | GB510R10-7 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | BACB30FQ10-7 | 60516 | WEST COAST AEROSPACE, INC. | | BACB30FQ10-7 | 81205 | THE BOEING COMPANY | | HL63PB10-7 | 17446 | HUCK INTERNATIONAL, INC | | HL63PB10-7 | 56878 | SPS TECHNOLOGIES, LLC | | HL63PB10-7 | 73197 | HI-SHEAR CORPORATION | | HL93PB-10-7 | 73197 | HI-SHEAR CORPORATION | | HL63PB10-7 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL63PB10-7 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.9275 INCHES MINIMUM AND 0.9475 INCHES MAXIMUM | | GRIP LENGTH | 0.4325 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.4689 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-5626 ASSN STD 2ND MATERIAL RESPONSE OR MIL-S-6049 ASSN STD 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | NOMINAL THREAD SIZE | 0.3125 INCHES | | SHANK DIAMETER | 0.6699 INCHES MINIMUM AND 0.6709 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 67200 DOUBLE POUNDS PER SQUARE INCH | | WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY II, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|