| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| GRIP LENGTH | 1.8075 INCHES MINIMUM AND 1.8175 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.7556 INCHES MINIMUM AND 0.7604 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PINCOTS ITEM |
| SHANK DIAMETER | 0.4047 INCHES MINIMUM AND 0.4057 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 24600 DOUBLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | NON-LUBED PINS MUST BE USED WITH WET SEALANTORLUBEDCOLLAR |
| WIDTH BETWEEN FLATS | 0.1582 INCHES MINIMUM AND 0.1617 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 24 |