| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| GRIP LENGTH | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SHANK DIAMETER | 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 11800 DOUBLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | NON-LUBED PINS MUST BE USED WITH WET SEALANTORLUBEDCOLLAR |
| WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 28 |